I promised on my Twitter that I would write a guide for this, so here it is. ONLY FOLLOW THIS GUIDE IF YOUR WII IS ON 4.3. Otherwise update to 4.3 before following this guide (or look around for another guide for your firmware).
You will need:
An SD card with about 800mb free, formatted as FAT32.
An wireless router or access point for your Wii to connect to
A Wii with 4.3 system menu installed
A copy of super smash bros. Brawl
Some free time (about 30 minutes)
What this will do:
Install the homebrew channel
Install BootMii, the unbricking tool (just in case)
Install Priloader, the system hacks tool
And install USB CFG Loader, allowing you to run backups from a thumb drive.
Now the how-to:
1. Turn on your Wii, and go into system settings. Make sure you're on 4.3 W/U/J. Once your sure, turn off your Wii.
2. Get the files you need from here, extract them to the root of your SD card.
3. If you have any custom stages in brawl, including the sample ones, delete them.
4. With your Wii off, insert your SD card, then start up brawl.
5. Go into custom stages. Your Wii should launch the Hackmii installer automagically.
6. Install the Homebrew channel first, then BootMii as BOOT2 if you can. otherwise IOS will do. Finsh the installer when you're done.
7. Your Wii will reboot, and (if you installed BootMii as Boot2) will start up BootMii. Now, press the power button on your Wii to move to the Cog (settings), then press Reset. This will bring up a menu. Press reset again to select the first option (NAND backup) and follow the pompts to backup your Wii.
8. This should take you back to the main menu, just move the cursor to the Wii icon, then hit Reset. The Wii system menu should load up.
9. Nearly there! Start up the Homebrew channel now.
10. Run the IOS226 Installation mod. That'll install IOS226, then it'll go back to the Homebrew channel.
11. Run YAWM Multimod Batch. This'll install most of the IOSs you'll need for Homebrew.
12. Run Priiloader 236 Mod. Once it launches, accept the agreement, then press + to install Priiloader. Hold Reset on you Wii once it's done. Priiloader will now load.
13. Select Hacks, then select what ones you want (mininum is: Block Disc Updates, Block Online Updates).
14. Exit out, and reboot your Wii.
Congrats, you're successfully homebrewed!
Now for CFG USB Loader. This is considerably more simple:
1. First, get the files you'll need. They can be found here.
2. Extract that to the root of your SD card.
3. Download this one, put that in a new folder called usbloader in the apps directory on your usb card.
You're done, you just need some games on a USB HDD. You can read on how to do that here: Link
Enjoy the world of Homebrew!
You will need:
An SD card with about 800mb free, formatted as FAT32.
An wireless router or access point for your Wii to connect to
A Wii with 4.3 system menu installed
A copy of super smash bros. Brawl
Some free time (about 30 minutes)
What this will do:
Install the homebrew channel
Install BootMii, the unbricking tool (just in case)
Install Priloader, the system hacks tool
And install USB CFG Loader, allowing you to run backups from a thumb drive.
Now the how-to:
1. Turn on your Wii, and go into system settings. Make sure you're on 4.3 W/U/J. Once your sure, turn off your Wii.
2. Get the files you need from here, extract them to the root of your SD card.
3. If you have any custom stages in brawl, including the sample ones, delete them.
4. With your Wii off, insert your SD card, then start up brawl.
5. Go into custom stages. Your Wii should launch the Hackmii installer automagically.
6. Install the Homebrew channel first, then BootMii as BOOT2 if you can. otherwise IOS will do. Finsh the installer when you're done.
7. Your Wii will reboot, and (if you installed BootMii as Boot2) will start up BootMii. Now, press the power button on your Wii to move to the Cog (settings), then press Reset. This will bring up a menu. Press reset again to select the first option (NAND backup) and follow the pompts to backup your Wii.
8. This should take you back to the main menu, just move the cursor to the Wii icon, then hit Reset. The Wii system menu should load up.
9. Nearly there! Start up the Homebrew channel now.
10. Run the IOS226 Installation mod. That'll install IOS226, then it'll go back to the Homebrew channel.
11. Run YAWM Multimod Batch. This'll install most of the IOSs you'll need for Homebrew.
12. Run Priiloader 236 Mod. Once it launches, accept the agreement, then press + to install Priiloader. Hold Reset on you Wii once it's done. Priiloader will now load.
13. Select Hacks, then select what ones you want (mininum is: Block Disc Updates, Block Online Updates).
14. Exit out, and reboot your Wii.
Congrats, you're successfully homebrewed!
Now for CFG USB Loader. This is considerably more simple:
1. First, get the files you'll need. They can be found here.
2. Extract that to the root of your SD card.
3. Download this one, put that in a new folder called usbloader in the apps directory on your usb card.
You're done, you just need some games on a USB HDD. You can read on how to do that here: Link
Enjoy the world of Homebrew!
No comments:
Post a Comment